Static fatigue crack propagation behavior of glass in vacuum.

Fatigue of Yttria-Stabilized Zirconia: II, Crack Propagation, Fatigue Striations, and Short-Crack Behavior

Fatigue crack propagation in 3Y-TZP was investigated using controlled surface flaws. A unique growth law strongly dependent on the maximum stress intensity factor and quadratically dependent on the amplitude of the range of stress intensity factor was established. This growth law was found to apply for both surface flaws and internal flaws and could be used to predict fatigue lifetime. The pres...

Fatigue-Crack Propagation Behavior of Ductile/Brittle Laminated Composites

A study has been made of the fatigue-crack propagation properties of a series of laminated Nbreinforced Nb3Al intermetallic-matrix composites with varying microstructural scale but nominally identical reinforcement volume fraction (20 pct Nb). It was found that resistance to fatigue-crack growth improved with increasing metallic layer thickness (in the range 50 to 250 mm) both in the crack-divi...

Fatigue crack propagation in microcapsule - toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...

High Temperature Fatigue Crack Propagation in INCONEL718

Stochastic modeling of fatigue crack propagation

This paper presents a stochastic model of fatigue-induced crack propagation in metallic materials. The crack growth rate predicted by the model is guaranteed to be non-negative. The model structure is built upon the underlying principle of Karhunen±Lo eve expansion and does not require solutions of stochastic di€erential equations in either Wiener integral or Itô integral setting. As such this ...