Static and dynamic response analysis of stay cables using terrestrial laser scanning and vibration measurements

نویسندگان

چکیده

Abstract. Nowadays, high accuracy measurements provided by terrestrial laser scanner and vision sensors allow to collect useful exhaustive information about the conditions of existing structures, detect defects geometry anomalies better understand their mechanical behavior. These avant-garde technologies were found be particularly effective for structural health assessment cable-stayed pedestrian bridge described in this paper. Considering a continuous mono-dimensional model an inclined perfectly flexible cable, axial tension is locally tangent cable profile. Thus, determining static response under self-weight consists geometric shape-finding problem. Through scanning, 3D point cloud was acquired, including data-abundant description actual configuration stays. Therefore, no longer unknown problem, which can inverted assess tension. Furthermore, modal analysis conducted also through image-based vibrations identify fundamental frequencies cables. The independent identification forces from (geometric) dynamic (spectral) data results good agreement.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

response articles: micro and macro analysis

the present study reports an analysis of response articles in four different disciplines in the social sciences, i.e., linguistics, english for specific purposes (esp), accounting, and psychology. the study has three phases: micro analysis, macro analysis, and e-mail interview. the results of the micro analysis indicate that a three-level linguistic pattern is used by the writers in order to cr...

15 صفحه اول

Broadband Vibration Measurements Using a Continuously Scanning Laser Vibrometer

In this article we will apply the continuously scanning vibrometer measurement principle introduced in literature for stepped sine measurementsto broadband excitations. Special attention will be given to the errors which are introduced in the procedure. Also, a method will be proposed to estimate the complexity of the vibration patterns. Different scanning signals to cover the measured area of ...

متن کامل

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Earthquake Deformation Analysis Using Terrestrial Scanning Laser - Lidar Technology

Earthquakes leave in their wake permanently deformed ground. These deformations take on extremely complex surfaces and shapes. A new technology, 3-D laser-scanning Light Detection And Ranging (LIDAR), allows for the rapid and remote sensing of damaged terrain to construct ultra-high resolution 3-D models of the ground. Scanning LIDAR targets the damaged area with sequenced LASER pulses that, in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials research proceedings

سال: 2023

ISSN: ['2474-3941', '2474-395X']

DOI: https://doi.org/10.21741/9781644902431-79