Static and Cyclic Fatigue Limits of Alumina Ceramics.
نویسندگان
چکیده
منابع مشابه
High-Temperature Cyclic Fatigue-Crack Growth in Monolithic Ti3SiC2 Ceramics
identical slip planes) and walls or kink boundaries. Thus, in addition to regular slip, mechanisms for ambient temperature The cyclic fatigue behavior of reactive hot-pressed Ti3SiCz plastic deformation in Ti3SiCz are thought to involve the ceramics are examined at temperatures from ambient to 1200°C readjustment of local stress and strain fields from kink band with the objective of characteriz...
متن کاملMullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملFatigue of dental ceramics.
OBJECTIVES Clinical data on survival rates reveal that all-ceramic dental prostheses are susceptible to fracture from repetitive occlusal loading. The objective of this review is to examine the underlying mechanisms of fatigue in current and future dental ceramics. DATA/SOURCES The nature of various fatigue modes is elucidated using fracture test data on ceramic layer specimens from the denta...
متن کاملSurface Contamination of Alumina Ceramics by Carbon
Article history: Received: 01.05.2016. Received in revised form: 25.07.2016. Accepted: 06.09.2016. This study presents the results of investigating the cause of contamination of aluminum oxide ceramics (Al2O3) in the form of brown colored stain. Contaminated ceramic surfaces were examined with the scanning electron microscope (SEM) equipped with the Energy Dispersive Spectrometer (EDS). The res...
متن کاملHertzian Contact Damage in Porous Alumina Ceramics
A study has been made of Hertzian contact damage in compressive shear stress field beneath the contact area. The observed microcrack density increases with grain size, porous and dense liquid-phase-sintered aluminas. Indentation stress–strain curves show increasing nonlinearity as the implying a threshold microstructural scale for crack initiation. In contrast, the micromechanisms controlling f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2000
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.108.1258_614