Startup characteristics of an ammonia loop heat pipe with a rectangular evaporator

Performance of Flexible Evaporator for Loop Heat Pipe Technologies

Steady State Model of a Loop Heat Pipe (LHP) With Coherent Porous Silicon (CPS) Wick in the Evaporator

A theoretical study is conducted to explore the effect of different parameters on the performance of a Loop Heat Pipe (LHP). These parameters are evaporator temperature, condenser temperature, total mass charge, the tube size of piping system, and pumping distance between evaporator and condenser. This paper pres ents a steady state model that describes the thermodynamics, heat transfer, and fl...

An Experimental Investigation of the Transient Characteristics on a Flat-Plate Heat Pipe During Startup and Shutdown Operations

This work presents an experimental investigation of the thermal performance of a flatplate heat pipe during startup and shutdown operations. Using the analytical model developed in a previously study, analytical and experimental results on the effect of input power and cooling heat transfer coefficient on the thermal performance of the heat pipe are presented and discussed. The results indicate...

a study on corrosion reasons of heat exchanger in ammonia unit

چکیده ندارد.

The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations

The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...