Standby power reduction using dynamic standby control with voltage keeper
نویسندگان
چکیده
منابع مشابه
Standby power reduction using dynamic standby control with voltage keeper
This paper presents dynamic standby control (DSC) with voltage keeper for further standby power reduction. As compared to the reported DSC, the new modified DSC can be kept deeply cut-off with negative overdrive voltage as well. Besides, a bootstrapped voltage keeper directly recharges the boosted node of power gate, which prevents leakage current during the recharging period. However, total st...
متن کاملStandby Voltage Scaling for Reduced Power
Lowering VDD during standby mode reduces power by decreasing both voltage and current. Measurements of a 0.13 m testchip show that reducing VDD to near the point where state is lost gives the best power savings. We propose closed-loop voltage scaling that uses “canary” flip-flops for achieving these savings. This approach provides over 2X higher savings than optimal open-loop approaches without...
متن کاملStandby power reduction using optimal supply voltage and body-bias voltage
This paper proposes a novel design method to minimize the leakage power during standby mode using a novel optimal supply voltage and body-bias voltage generating technique for nanoscale VLSI systems. The minimum level of VDD is generated for different temperature and process conditions adaptively using a look-up-table method. The subthreshold current as well as gate-tunneling and bandto-band-tu...
متن کاملWireless Home Network Control Mechanism for Standby Power Reduction
Standby power is electric power that a device consumes when not in present use, but plugged in to a source of power and ready to be used. Present estimates indicate that standby power consumption reaches 10 to 15 percent of total residential electrical use. In this paper, we propose a Host-Agent based standby power control mechanism in home network environment. It uses the IEEE 802.15.4 based Z...
متن کاملStandby Power Reduction Techniques for Asynchronous Circuits with Indeterminate Standby States
In the literature, some schemes were proposed to combine Multi-Threshold CMOS (MTCMOS) with asynchronous circuits to reduce standby power consumption. However, all of these can only be applied to asynchronous circuits in which the values of all signals can be determined in the standby state. As a result, their applications are limited. To solve this problem, this paper develops standby power re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEICE Electronics Express
سال: 2017
ISSN: 1349-2543
DOI: 10.1587/elex.14.20170783