Stall Margin Improvement in a Centrifugal Compressor through Inducer Casing Treatment

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Stall Vortex Shedding over a Compressor Cascade (RESEARCH NOTE)

The unstable flow with rotating-stall-like (RS) effects in a rotor-cascade of an axial compressor was numerically investigated. The RS was captured with the reduction in mass flow rate and increasing of exit static pressure with respect to design operating condition of the single rotor. The oscillatory velocity traces during the stall propagation showed that the RS vortices repeat periodically,...

متن کامل

Stall Vortex Shedding Over a Compressor Cascade (RESEARCH NOTE)

The unstable flow with rotating-stall-like (RS) effects in a rotor-cascade of an axialcompressor was numerically investigated. The RS was captured with the reduction in mass flow rateand increasing of exit static pressure with respect to design operating condition of the single rotor.The oscillatory velocity traces during the stall propagation showed that the RS vortices repeatperiodically, and...

متن کامل

Numerical Investigation for the Impact of Single Groove on the Stall Margin Improvement and the Unsteadiness of Tip Leakage Flow in a Counter-Rotating Axial Flow Compressor

A low-speed counter-rotating axial flow compressor (CRAC) with single circumferential grooved casing treatment (CT) was investigated numerically. Both steady and time-accurate numerical calculations were performed to study the effects of the single grooved CTs over the rear rotor on the stability enhancement and the unsteadiness of tip leakage flow (TLF) in the CRAC. Parametric studies indicate...

متن کامل

Evaluation of Centrifugal Compressor Stability Margin and Investigation of Antiswirl Mechanism

Stringent stability screening criteria by the American Petroleum Institute (API) result in higher level rotor stability analyses to be performed on more intermediate-pressure compressor rotors and in more detail. These high-level stability analyses include predictions of impeller and seal rotordynamic forces and even extra effort on design and analysis of special damping devices as a backup, su...

متن کامل

Numerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches

An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Rotating Machinery

سال: 2016

ISSN: 1023-621X,1542-3034

DOI: 10.1155/2016/2371524