Stabilization of metastable tetragonal zirconia nanocrystallites by surface modification
نویسندگان
چکیده
منابع مشابه
Detection of tetragonal zirconia in alumina–zirconia powders by thermoluminescence
The thermoluminescence (TL) after excitation by UV or X-rays radiation of alumina-zirconia powders is investigated. The composites present five of the characteristic peaks of zirconia at −170, −145, −90, 0 and 95 °C. After a thermal treatment of mixed oxides, a new peak is observed at −35 °C in TL. This peak reveals the presence of stabilized tetragonal zirconia in the material. Moreover by com...
متن کاملInfluence of surface topography and surface physicochemistry on wettability of zirconia (tetragonal zirconia polycrystal).
Surface modification technologies are available for tetragonal zirconia polycrystal (TZP) to enhance its bioactivity and osseointegration capability. The surface wettability of an implant material is one of the important factors in the process of osseointegration, possibly regulating protein adsorption, and subsequent cell behavior. The aim of this study was to clarify the effect of topographic...
متن کاملMacrochanneled Tetragonal Zirconia Polycrystals Coated by a Calcium Phosphate Layer
A coextrusion process was used to fabricate three-directionally macrochanneled tetragonal zirconia polycrystals (TZP) with a calcium phosphate coating layer. The three-directionally connected structure was built by a unique alignment and a lamination of the TZP surrounded by calcium phosphate and carbon black filaments. After a thermal treatment (binder burnout and sintering), a 52 vol% array o...
متن کاملOxide surface modification: synthesis and characterization of zirconia-coated alumina.
Four aluminas were used as supports for impregnation with a zirconium oxide with the aim to achieve a coating, without phase separation, between support and modifier. The supports were impregnated with different concentrations of zirconium aqueous resin, obtained through the polymeric precursor method. After impregnation the samples were calcined and then characterized by XRD, which led to iden...
متن کاملEffect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms
This work is focused on the effect of amorphous SiO2 addition on the phase transformation and microstructural evolution of ZrO2 particles. Considering the structural similarities between the amorphous ZrO2 and its tetragonal structure, XRD results showed initial nucleation of metastable tetragonal ZrO2 from its amorphous matrix upon heat treatment. This metastable phase is unstable in pure ZrO2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 2010
ISSN: 0022-2461,1573-4803
DOI: 10.1007/s10853-010-5007-1