Stabilization Of Dry-Wound High-Field Superconducting Magnet By Controlling Frictional Spring Force.
نویسندگان
چکیده
منابع مشابه
Nb3Sn Wire Technology for High-field Superconducting Magnet
Nb3Sn superconducting wires are widely used for highfield superconducting magnets, and the NMR magnet is one of the most successful applications. In order to realize a large Jc (critical current density), which is essential to high-field superconducting magnets, several different types of production methods have been developed, such as the bronze-route method, the powderin-tube method and the i...
متن کاملA new ring-shape high-temperature superconducting trapped-field magnet
This paper presents a new trapped-field magnet made of second-generation high-temperature superconducting (2G HTS) rings. This so-called ring-shape 2G HTS magnet has the potential to provide much stronger magnetic fields relative to existing permanent magnets. Compared to existing 2G HTS trappedfield magnets, e.g. 2G HTS bulks and stacks, this new ring-shape 2G HTS magnet is more flexible in si...
متن کاملStatus of High Temperature Superconducting Magnet Development
Since the discovery of high temperature superconductors more than 2 decades ago, there has been interest in their use for future fusion machines. Lack of performance of commercially available materials, however, dampened the initial optimism. However, recent advances in HTS materials, mostly second-generation tapes, open attractive topologies. In addition to reduced cryogenic loads and increase...
متن کاملSuperconducting poloidal field magnet engineering for the ARIES-ST
The critical issues of the poloidal systems for the ARIES-ST design have been presented in this paper. Because of the large plasma current and the need of highly shaped plasmas, the poloidal field (PF) coils should be located inside the toroidal field in order to reduce their current. Even then, the divertor coils carry large currents. The ARIES-ST PF coils are superconducting using the interna...
متن کاملExperimental Investigation of High-Temperature Superconducting Magnet for Maglev
The use of high-temperature superconducting wires (HTS wires) in on-board superconducting magnets for maglev has several advantages such as improvement in the stability of the superconducting magnet, improvement in reliability through simplification of the magnet structure, and decrease in the mass of the superconducting magnet and energy consumed by the on-board cryocooler. To demonstrate the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Industry Applications
سال: 1995
ISSN: 0913-6339,1348-8163
DOI: 10.1541/ieejias.115.634