منابع مشابه
Stabilization of Austenite Associated with Prior Formation of Martensite
The stabilization of retained austenite was studied via a two-step cooling procedure. Alloys with M , temperatures below 0 OC were used. It was found that the martensitic transformation starting temperature, M,, was lowered to M,' during the second step of cooling. With increasing the amount of previously formed martensite, the difference in the transformation starting temperatures, AM, (= M,M,...
متن کاملMicrostructure inhomogeneity of Fe-31%Ni alloy and stabilization of austenite
Сrystal structure and mechanism of crystallization of Fe-Ni alloys were studied by methods of X-ray diffraction and metallography. It has been found that macro- and microstructure of austenitic alloy was essentially heterogeneous at the contact and free surfaces and in the volume of a ribbon. The indentified peculiarities of the austenitic phase in different areas of the ribbon are attributed t...
متن کاملEFFECT OF AUSTENITE GRAIN MORPHOLOGY ON VARIANT SELECTION OF MARTENSITE TRANSFORMED FROM ULTRAFINE-GRAINED AUSTENITE
In this research, variant selection of martensite transformed from ultrafine-grained (UFG) austenite fabricated by accumulative roll bonding (ARB) process and subsequent annealing was investigated with respect tomorphology of parentaustenitic phase. The results show that the original shape of austenite grain is very effective factor in determiningthe preferred variants of martensite transformed...
متن کاملhazard evaluation of gas condensate stabilization and dehydration unit of parsian gas refinery using hazop procedures
شناسایی مخاطرات در واحد 400 پالایشگاه گاز پارسیان. در این پروزه با بکارگیری از تکنیک hazop به شناسا یی مخاطرات ، انحرافات ممکن و در صورت لزوم ارایه راهکارهای مناسب جهت افزایش ایمنی فرا یند پرداخته میگردد. شرایط عملیاتی مخاطره آمیز نظیر فشار و دمای بالا و وجود ترکیبات مختلف سمی و قابل انفجار در واحدهای پالایش گاز، ضرورت توجه به موارد ایمنی در این چنین واحدهایی را مشخص می سازد. مطالعه hazop یک ر...
Austenite formation during intercritical annealing
Purpose: of this paper is the effect of the soft annealing of initial microstructure of the 6Mn16 steel on the kinetics of the austenite formation during next intercritical annealing. Design/methodology/approach: Analytical TEM point analysis with EDAX system attached to Philips CM20 was used to evaluate the concentration of Mn, Ni and Cr in the microstructure constituents of the multiphase ste...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1960
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.24.1_58