Stabilization of a hypersonic boundary layer using a felt-metal porous coating
نویسندگان
چکیده
منابع مشابه
Passive Control of Hypersonic Boundary-Layer Transition using Regular Porous Coating
Passive control of hypersonic boundary-layer transition using porous coatings has been studied by theoretical analyses, experiments, and numerical simulations. It was found that porous coating stabilizes Mack’s second mode and destabilizes Mack’s first mode. However, there are only few studies on the stabilization efficiency of porous coating. And no work has been reported about the thermochemi...
متن کاملStabilization of Hypersonic Boundary Layers by Porous Coatings
A second-mode stability analysis has been performed for a hypersonic boundary layer on a wall covered by a porous coating with equally spaced cylindrical blind microholes. Massive reduction of the second mode ampli cation is found to be due to the disturbance energy absorption by the porous layer. This stabilization effect was demonstrated by experiments recently conducted on a sharp cone in t...
متن کاملAcoustic Properties of Porous Coatings for Hypersonic Boundary-Layer Control
AR = cavity aspect ratio a = speed of sound b = cavity half-width ~ C = dynamic compressibility c = phase speed cp = specific heat at constant pressure f = frequency H = cavity depth k = wave number m = propagation constant P = pressure Pr = Prandtl number R = reflection coefficient p = acoustic pressure pi = initial pulse amplitude Re = acoustic Reynolds number s = cavity spacing T = temperatu...
متن کاملNumerical Simulation of Shock-Wave/Boundary/Layer Interactions in a Hypersonic Compression Corner Flow
Numerical results are presented for the shock-boundary layer interactions in a hypersonic flow over a sharp leading edge compression corner. In this study, a second- order Godunov type scheme based on solving a Generalized Riemann Problem (GRP) at each cell interface is used to solve thin shear layer approximation of laminar Navier-Stokes (N-S) equations. The calculated flow-field shows general...
متن کاملInfluence on the Hypersonic Boundary-Layer Flow
For aerospace or hypersonic cruise vehicle the state of the boundary layer is of great importance because for turbulent boundary layers, the thermal loads and skin friction are higher than in laminar boundary layers. Therefore , knowledge of cooling features and laminar-turbulent transition is necessary for the design of the thermal protection system (TPS). Different strategies are used to redu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fluid Mechanics
سال: 2015
ISSN: 0022-1120,1469-7645
DOI: 10.1017/jfm.2015.156