Stability of Steel Columns with Non-Uniform Cross-Sections

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simplified Approach for Torsional Analysis of Non-homogenous Tubes with Non-circular Cross-sections

In this paper a method is presented for torsional analysis of non-homogeneous tubes with arbitrarily shaped cross-sections. A previously presented method based on Bredt’s theory is extended to achieve formulas for torsional analysis. Shear modulus varies through the thickness according to a power law distribution. To validate the accuracy of the presented formulas for angle of twist and shear s...

متن کامل

Conceptual Design of Reactive Distillation Columns with Non-Reactive Sections

Reactive distillation has received intense attention due to the well known benefits of integrating distillation with reaction in a single unit. While there are procedures available for the synthesis of non-reactive columns and of reaction-separation systems, the design of reactive distillation columns is still a challenge. This work presents a new synthesis and design methodology for reactive d...

متن کامل

Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method

Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...

متن کامل

Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method

Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...

متن کامل

SEISMIC PERFORMANCE OF CROSS-SHAPED COLUMNS WITH 500 MPa GRADE REINFORCING STEEL BARS

Original scientific paper Based on the experimental research on three cross-shaped columns with 500 MPa grade reinforcing steel bars, the contrastive analysis is made on failure mode, bearing capacity and displacement ductility of each column specimens with different stirrup spacing under the identical axial compression ratio. The research shows that the longitudinal bars yield before spalling ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: The Open Construction and Building Technology Journal

سال: 2012

ISSN: 1874-8368

DOI: 10.2174/1874836801206010001