Stability of Formaldehyde Calibration Gas by Permeation Tube Using Paraformaldehyde
نویسندگان
چکیده
منابع مشابه
hazard evaluation of gas condensate stabilization and dehydration unit of parsian gas refinery using hazop procedures
شناسایی مخاطرات در واحد 400 پالایشگاه گاز پارسیان. در این پروزه با بکارگیری از تکنیک hazop به شناسا یی مخاطرات ، انحرافات ممکن و در صورت لزوم ارایه راهکارهای مناسب جهت افزایش ایمنی فرا یند پرداخته میگردد. شرایط عملیاتی مخاطره آمیز نظیر فشار و دمای بالا و وجود ترکیبات مختلف سمی و قابل انفجار در واحدهای پالایش گاز، ضرورت توجه به موارد ایمنی در این چنین واحدهایی را مشخص می سازد. مطالعه hazop یک ر...
U-Tube Manometer Calibration using ANFIS
This paper deals with the implementation of the Adaptive neuro fuzzy inference system (ANFIS) on a Xilinx based Field Programmable Gate Array Spartan-3E. The implemented hardware is then used to efficiently calibrate the U-Tube manometer, in which the relation between the level of mercury and the Capacitance developed across the Copper Plates of the manometer is highly non-linear. This system s...
متن کاملMicrofabricated Formaldehyde Gas Sensors
Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power ga...
متن کاملThe controlling effect of temperature in the application of permeation tube devices in standard gas generation.
In this study, the performance of permeation tube (PT) devices for the generation of VOC calibration gas was examined by successively generating BTX gas at five temperatures (30, 50, 70, 80, and 100 °C) and two flow rates (400 and 800 mL min⁻¹). A distinct relationship was observed between temperatures and permeation rates (PR) (or generated BTX concentrations). We examined the reliability of t...
متن کاملCalibration of a Quadrupole Gas Analyzer Using a Reference Gas*
A quadrupole gas analyzer system was calibrated for the gases H2, He, N2, 02, A, and Xe. The procedure involved first calibrating the system for argon, as the reference gas. This was done using conventional techniques. A mixture of the above gases was then introduced into the system to be calibrated. The system configuration was such that the ratio of the partial pressures of each of the test g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indoor Environment
سال: 2012
ISSN: 1882-0395,2186-4322
DOI: 10.7879/siej.15.7