Stability of amorphous Ta–O nanotubes prepared by anodization: Thermal and structural analyses
نویسندگان
چکیده
منابع مشابه
Thermal stability and structural changes of double-walled carbon nanotubes by heat treatment
We describe, for the first time, the sequential structural changes of bundles of double-walled carbon nanotubes (DWNTs) as a function of heat treatment temperature. DWNTs (inner diameters >0.9 nm) are structurally stable up to 2000 C. Above 2100 C, the outer walls of adjacent DWNTs start coalescing into large diameter tubes. At temperatures higher than 2100 C, three different types of structure...
متن کاملEffect of Thickness on the Structural Properties of Tellurium Film Prepared by Thermal Evaporation
In this research, tellurium (Te) film with thicknesses of 100-250 nm were deposited on ceramic substrates by thermal evaporation at 373 K. The thickness of the film was determined by Rutherford backscattering spectroscopy. The influence of the thickness on the structural, morphological and molecular bonds was characterized using XRD, scanning electron microscope, and Raman spectroscopy. The XRD...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولTribological and thermal stability study of nanoporous amorphous boron carbide films prepared by pulsed plasma chemical vapor deposition
In this work, the thermal stability and the oxidation and tribological behavior of nanoporous a-BC:H films are studied and compared with those in conventional diamond-like carbon (DLC) films. a-BC:H films were deposited by pulsed plasma chemical vapor deposition using B(CH3)3 gas as the boron source. A DLC interlayer was used to prevent the a-BC:H film delamination produced by oxidation. Therma...
متن کاملPhoto-electrocatalytic activity of TiO2 nanotubes prepared with two-step anodization and treated under UV light irradiation
To improve the photo-catalytic degradation of salicylic acid, we reported the fabrication of ordered TiO2 nanotube arrays by a simple and effective two-step anodization method and then these TiO2 nanotubes treated in a methanol solution under UV light irradiation. The TiO2 nanotubes prepared in the two-step anodization process showed better photo-catalytic activity than TiO2 nanotubes prepared ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research
سال: 2014
ISSN: 0884-2914,2044-5326
DOI: 10.1557/jmr.2014.44