Stability Analysis of Concrete Block Anchor on Steep-Slope Floating Breakwater

نویسندگان

چکیده

The floating breakwater is a protective structure that can absorb waves and be used effectively in coastal areas with moderate wave environmental conditions. stability of the affected by tension mooring line weight anchor. This research was conducted experimentally model scale 1:10 on systems concrete anchor blocks three types configurations. experiment carried out irregular following variations: height period, angle, width, weight. results this study indicate at steepness 0.02–0.025 breakwater, which installed angle 45 deg, configuration 3 has largest parameter among other However, if 90 deg cross, configurations 2 have almost same stability. test also show relative width will affect parameters. Configuration (B = 30 cm) stability-parameter value 10 cm 20 cm).

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

rodbar dam slope stability analysis using neural networks

در این تحقیق شبکه عصبی مصنوعی برای پیش بینی مقادیر ضریب اطمینان و فاکتور ایمنی بحرانی سدهای خاکی ناهمگن ضمن در نظر گرفتن تاثیر نیروی اینرسی زلزله ارائه شده است. ورودی های مدل شامل ارتفاع سد و زاویه شیب بالا دست، ضریب زلزله، ارتفاع آب، پارامترهای مقاومتی هسته و پوسته و خروجی های آن شامل ضریب اطمینان می شود. مهمترین پارامتر مورد نظر در تحلیل پایداری شیب، بدست آوردن فاکتور ایمنی است. در این تحقیق ...

Pullout Load Analysis of Reinforced Concrete Anchor Shafts

In this paper, results obtained in both conventional and finite element analysis of straight and belled anchor shafts subjected to a pullout force are presented. In numerical analysis, it is assumed that no drainage takes place during the anchor pullout. Comparisons between two conventional methods of analysis for ultimate pullout load and the results obtained by the finite element analysis are...

متن کامل

Practical Probabilistic Slope Stability Analysis

A practical procedure is described for implementing Spencer’s method of slices with varying side force inclination. The search for the noncircular critical slip surface is accomplished using spreadsheet-automated constrained optimization. The deterministic formulation is then extended probabilistically to compute the Hasofer-Lind reliability index via constrained optimization of the dispersion ...

متن کامل

Slope Length Effects on Soil Loss for Steep Slopes

cients. Normalizing to a unit plot of length 22.13 m, both the USLE and RUSLE use the equation Empirical soil erosion models continue to play an important role in soil conservation planning and environmental evaluations around L 5 (l/22.13) [2] the world. The effect of hillslope length on soil loss, often termed the where L is soil loss normalized to the 22.13-m-long slope length factor, is one...

متن کامل

A Proposed Modeling Method in Finite Element Slope Stability Analysis

Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Fluids

سال: 2022

ISSN: ['2311-5521']

DOI: https://doi.org/10.3390/fluids7080259