Squeeze casting results of aluminium alloys

Continuous Roll Casting of Aluminium Alloys– Casting Parameters Analysis

The continuous roll casting process (CRC), consisting of continuous strip casting between rolls, is now well known. It was introduced by the SCAL Company (Pechiney Ugine Kuhlmann Group) 60 years ago 1 . The process consists of solidifying aluminum or aluminum alloys between the water-cooled rolls of a duo rolling mill. From the moment when solidification is completed to the moment when the stri...

Macrosegregation in direct-chill casting of aluminium alloys

Modelling of Precipitation Hardening in Casting Aluminium Alloys

Precipitation hardening, because it involves the hardening of the material over a prolonged time, is also called age hardening, or ageing. By the appropriate heat treatment of precipitation hardening, the strength or hardness of some heat-treatable aluminium alloys can be enhanced by the formation of nano-meter sized second-phase precipitated particles within the original phase matrix. The fine...

Casting alloys.

Although the role of dental casting alloys has changed in recent years with the development of improved all-ceramic materials and resin-based composites, alloys will likely continue to be critical assets in the treatment of missing and severely damaged teeth. Alloy shave physical, chemical, and biologic properties that exceed other classes of materials. The selection of the appropriate dental c...

The densification mechanism of squeeze casting

The solidification process during squeeze casting is analyzed based on the classical solidification and plastic deformation theory. The linear relationship between punch velocity and the solidification rate is established if the density change of molten meals is neglected. To obtain defect-free castings, the punch velocity should be larger than the solidification rate. The densification mechani...