Spray deposition of graphene nano-platelets for modifying interleaves in carbon fibre reinforced polymer laminates
نویسندگان
چکیده
منابع مشابه
Drilling of carbon fibre reinforced laminates – a study
The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to “near-net” shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most ...
متن کاملCharacterization and analysis of carbon fibre-reinforced polymer composite laminates with embedded circular vasculature.
A study of the influence of embedded circular hollow vascules on structural performance of a fibre-reinforced polymer (FRP) composite laminate is presented. Incorporating such vascules will lead to multi-functional composites by bestowing functions such as self-healing and active thermal management. However, the presence of off-axis vascules leads to localized disruption to the fibre architectu...
متن کاملSpray Deposition of Cork Reinforced Polyester
The objective of this research is to enable large part or high volume manufacturing processes to make consumer or industrial products from a cork reinforced polymer composite, similar to current applications of glass reinforced polyester. The low initial investment and high flexibility of the spray lay-up process make it an attractive candidate to study. A spray lay-up apparatus was successfull...
متن کاملToughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets
The processing conditions for preparing well dispersed silica-graphene nanoplatelets and silica-graphene oxide nanoplatelets (GONP) composites were optimized using powder and colloidal processing routes. Fully dense silica-GONP composites with up to 2.5 vol% loading were consolidated using spark plasma sintering. The GONP aligned perpendicularly to the applied pressure during sintering. The fra...
متن کاملDelamination Analysis of Carbon Fibre Reinforced Laminates: Evaluation of a Special Step Drill
Drilling of carbon fibre/epoxy laminates is usually carried out using standard drills. However, it is necessary to adapt the processes and/or tooling as the risk of delamination, or other damages, is high. These problems can affect mechanical properties of produced parts, therefore, lower reliability. Production of higher quality holes is a challenge to everyone related with composites industry...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108831