منابع مشابه
Titanium Welding Technology
In order to establish titanium welding technology TIG arc weldability and MIG arc weldability were surveyed. For TIG arc weldability influence of arc length and thickness to proper region of welding condition became obvious. For MIG arc weldability a new method to defend wandering phenomenon was developed.
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملDesign of Spot Welding Robot
Welding robot has played an extremely important role in the welding production of high-quality, high-efficiency. The paper designed the hardware structure and software of spot welding robot. The hardware design mainly includes the major modules of arm and base; the hardware design includes two parts: manual mode and automatic mode. Manual mode is generally used for the robot system installation...
متن کاملFinite element simulation of laser spot welding
The present work reports on a two-dimensional axisymmetric nite element analysis of heat ow during laser spot welding, taking into account the temperature dependence of the physical properties and latent heat of transformations. An analysis based on conduction heat transfer alone, but using the ‘double ellipsoidal’ representation of the laser beam, seems to be suf cient to estimate the tra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1966
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.35.7_599