Spot and Laser Weldability of Coated Steel Sheets
نویسندگان
چکیده
منابع مشابه
Weldability Investigation of Fine-grained S1100ql Steel
I. Samardžić, Faculty of Mechanical Engineering Slavonski Brod, Croatia, A. Ćorić, Bratstvo, Novi Travnik, Bosnia and Herzegovina, M. Dunđer, Department for Polytechnic, University of Rijeka, Croatia. This paper presents the results of weldability investigation on welded joints made of fine grained high-strength S1100QL steel. The investigations are performed on two welded plates by HV 10 hardn...
متن کاملMetallurgical investigation in weldability of Aluminium Silicon coated boron steel with different coating thickness
Hot-pressed aluminium and silicon coated boron steel is used in the car industry where high tensile strength is of great importance, such as in the safety cage of a car where deformation has to be kept to a minimum in case of a collision. After hot-pressing the AlSi-boron steel shows excellent properties with high tensile strength, minimal spring back and also shows good protection against corr...
متن کاملOxidation resistance of plasma coated and laser treated mild steel
Stainless steel powder was coated on mild steel substrate using plasma coating. The porous coating thus obtained was modified using laser irradiation. The oxidation behaviour of the plasma coated as well as laser treated material was studied in air at 1073 K. There was considerable decrease in oxidation rate of mild steel after plasma coating as expected. In addition the oxidation resistance im...
متن کاملComparison of Laser-Engraved Hole Properties between Cold-Rolled and Laser Additive Manufactured Stainless Steel Sheets
Laser drilling and laser engraving are common manufacturing processes that are found in many applications. With the continuous progress of additive manufacturing (3D printing), these processes can now be applied to the materials used in 3D printing. However, there is a lack of knowledge about how these new materials behave when processed or machined. In this study, sheets of 316L stainless stee...
متن کاملKeyhole behaviour during laser welding of zinc-coated steel
The production of consistent, high-quality laser welds on zinc-coated steels for the automotive industry remains a challenge. A simple overlap joint geometry is desirable in these applications but has been shown to be extremely detrimental to laser welding because the zinc vapour formed at the interface between the two sheets expands into the keyhole and disrupts fluid flow in the melt pool, wh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 2004
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.73.174