Spontaneous infiltration velocity in fabrication process of particulate reinforced magnesium composites.
نویسندگان
چکیده
منابع مشابه
NUCLEATION PHENOMENON IN SiC PARTICULATE REINFORCED MAGNESIUM COMPOSITE
Metal matrix composite (MMC) technology can improve the service performance of matrix metals and alloys. Most magnesium alloy based MMCs are produced via a casting process, therefore the casting microstructures are of vital importance to their performance in service. The formation of microstructure during solidification of MMCs is mainly influenced by four factors: nucleation (or its absence) o...
متن کاملFabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملFabrication of in-situ grown graphene reinforced Cu matrix composites
Graphene/Cu composites were fabricated through a graphene in-situ grown approach, which involved ball-milling of Cu powders with PMMA as solid carbon source, in-situ growth of graphene on flaky Cu powders and vacuum hot-press sintering. SEM and TEM characterization results indicated that graphene in-situ grown on Cu powders guaranteed a homogeneous dispersion and a good combination between grap...
متن کاملFracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملOn the transformation behaviour of NiTi particulate reinforced AA2124 composites
The transformation behaviour of AA2124 alloys reinforced NiTi particulates of 10 vol pct and 20 vol pct has been studied by differential scanning calorimetry (DSC), thermoelectric power (TEP) and internal friction (IF). Addition of NiTi particulates increase the damping capacity as well as the precipitation kinetics of AA2124 composites with respect to the base AA2124. Heat treatments performed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1995
ISSN: 0451-5994
DOI: 10.2464/jilm.45.537