Spin Test of 5 kWh Composite Flywheel Rotor
نویسندگان
چکیده
منابع مشابه
2 MW 130 kWh Flywheel Energy Storage System
The Center for Electromechanics has developed and is currently testing a 2 MW, 130 kWh (480 MJ) flywheel energy storage system (FESS) designed as a load leveling energy management device. The flywheel energy storage system consists of the energy storage flywheel, a high speed induction motor/generator, and a bidirectional power converter. The FESS is a key element of the Advanced Locomotive Pro...
متن کاملExperimental Investigation ofthe Hovering Performance of aTwin-Rotor Test Model
Hover performance of a twin-rotor test model in terms of rotor overlap sweep, blade collective pitch, and blade tip speedwasexaminedexperimentally.The experimental setup consisted of two three-bladed rotors (tandem rotor configuration) with a diameter of1,220 mm and constant chord of 38 mm, giving a blade aspect ratio of 16.05. The blades were of a rectangular planform with NACA 0012 cross-sect...
متن کاملRotor Position and Vibration Control for Aerospace Flywheel Energy Storage Devices and Other Vibration Based Devices
Flywheel energy storage has distinct advantages over conventional energy storage methods such as electrochemical batteries. Because the energy density of a flywheel rotor increases quadratically with its speed, the foremost goal in flywheel design is to achieve sustainable high speeds of the rotor. Many issues exist with the flywheel rotor operation at high and varying speeds. A prominent probl...
متن کامل250 kW Flywheel with HTS Magnetic Bearing for Industrial Use
A 250 kW / 5 kWh engineering prototype Flywheel Energy Storage System (FESS) was designed, fabricated and component tested by Adelwitz Technologiezentrum GmbH (ATZ) and L-3 Communications Magnet Motor GmbH (MM). A heavy – load vertical 0.6 ton rotor is suspended totally magnetically by an HTS radial-passive bearing on the top together with a PM bearing at the bottom. Further features are the fl...
متن کاملDesign of magnetically levitated rotors in a large flywheel energy storage system from a stability standpoint
The stability of flywheels in an energy storage system supported by active magnetic bearings (AMBs) is studied in this paper. We designed and built two flywheel energy storage systems (FESS) that can store up to 5 kWh of usable energy at a maximum speed of 18,000 rpm. One is optimized to store as much energy as possible, resulting in a flywheel with a strong gyroscopic coupling. The other has a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Academia-Industrial cooperation Society
سال: 2010
ISSN: 1975-4701
DOI: 10.5762/kais.2010.11.9.3135