Spin Angle Controlled Lapping of Steel Ball with Grain Size Degradation.

Possibility of Determining Steel Grain Size Using Ultrasonic Waves

The microstructure of steel is decisive for its chemical, physical and mechanical properties. Depending on the parameters characterising liquid metal as well as the parameters of the steel casting influencing the crystallisation process, the macrostructure of casts and ingots consist of three, two or only one crystallisation zone. In steel ingots, its most frequent by consist of three zones: ch...

Quantifying the dependency of uniform corrosion of structural steel on grain size

The dependency of uniform corrosion of structural steel on the average grain size (D) should be quantified for design purposes. In the present work, a spectrum of grain sizes was obtained by simple heat treatment routes in st37 structural steel. It was revealed that the corrosion current density (icorr) increased by grain refinement, which was related to the increased density of grain boundarie...

Grain Size Effect on the Hot Deformation Processing Map of AISI 304 Austenitic Stainless Steel

In this study, the hot deformation processing map of AISI 304 austenitic stainless steel in two initial grain sizes of 15 and 40 μm was investigated. For this purpose, cylindrical samples were used in the hot compression test at the temperature range of 950-1100 °C and the strain rate of 0.005-0.5% s-1. At first, the relationship between the peak stress and Zener-Hollomon parameter w...

The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel

The grain size refinement of AISI 422 martensitic stainless steel in the temperature range of 950-1150 ºC was investigated by hot deformation tests. The deformed specimens were held at deformation temperature with delay times of 5 to 300s after achieving a strain of 0.3. The austenite grains exhibit a considerable growth at temperature higher than 1050˚C, while the grain coarsening is negligibl...

Apparent Ball Size 1 Running head : BATTING AVERAGE AND APPARENT BALL SIZE See the Ball , Hit the Ball : Apparent Ball Size is Correlated with Batting Average