Spherical indentation of copper: Crystal plasticity vs experiment

Spherical indentation of elastic-plastic solids

The finite-element method is used to perform an accurate numerical study of the normal indentation of an elastic-plastic half-space by a rigid sphere. The effects of elasticity and strain-hardening rate of the half-space are explored, and the role of friction is assessed by analysing the limiting cases of frictionless contact and sticking friction. Indentation maps are constructed with axes of ...

Spherical Indentation Hardness of Shape Memory Alloys

Analysis of spherical indentation of superelastic shape memory alloys

Dimensional analysis and the finite element method are applied in this paper to study spherical indentation of superelastic shape memory alloys. The scaling relationships derived from dimensional analysis bridge the indentation response and the mechanical properties of a superelastic shape memory alloy. Several key variables of a superelastic indentation curve are revealed and examined. We prov...

Fracture mechanics analysis of thin coatings under spherical indentation

Spherical indentation of a thin, hard coating bonded to a thick substrate is investigated. The bending of the coating over the softer substrate induces concentrated tensile stresses on the lower and upper coating surfaces, from which transverse cracks may ensue. This work is primarily concerned with ring cracks originating from the top surface of the coating. In-situ indentation tests are carri...

On the measurement of stress–strain curves by spherical indentation

It has been proposed that with the appropriate models, instrumented indentation test (IIT) data can be reduced to yield the uniaxial stress–strain behavior of the test material. However, very little work has been done to directly compare the results from uniaxial tension and spherical indentation experiments. In this work, indentation and uniaxial tension experiments have been performed on the ...