Spectacular Oxygen Evolution Reaction Enhancement Through Laser Processing of the Nickel‐Decorated Titania Nanotubes
نویسندگان
چکیده
Adv. Mater. Interfaces 2021, 8, 2001420 DOI: 10.1002/admi.202001420 In the Experimental Section of original article, pressure vacuum chamber was stated incorrectly as 5 × 10−5 bar, whereas in experiment mbar used. The correct sentence Material Synthesis (page 4 6) should read “The samples were then decorated with nm nickel via magnetron sputtering using Ni target (99.99%) and placed onto motorized table (5 mbar)”. authors sincerely apologize for any inconvenience caused by this correction.
منابع مشابه
Photo corrosion of titania nanotubes within water splitting reaction
Titania nanotubes (TNT) prepared by anodization of Ti foils were used for water splitting in a standalone cell. The concentration polarization between the anode side (1M NaOH) and cathode side (0.5 M H2SO4) ensured that the water splitting reaction could take place with no external bias and separate H2 and O2 evolution could be achieved. The destructi...
متن کاملPhoto corrosion of titania nanotubes within water splitting reaction
Titania nanotubes (TNT) prepared by anodization of Ti foils were used for water splitting in a standalone cell. The concentration polarization between the anode side (1M NaOH) and cathode side (0.5 M H2SO4) ensured that the water splitting reaction could take place with no external bias and separate H2 and O2 evolution could be achieved. The destructi...
متن کاملNickel Oxide/Carbon Nanotubes as Active Hybrid Material for Oxygen Evolution Reaction
Carbon nanotubes are of great interest due to their high surface area and rich edge sites, which are favorable for wide applications. Here, a simple and efficient routine is presented by decoration of multi-wall carbon nanotube (MWCNT) with nickel oxide (NiO) nanoparticles.The morphologies of NiO-MWCNT were investigated by using scanning electron microscope (SEM) and energydispersive X-...
متن کاملphoto corrosion of titania nanotubes within water splitting reaction
titania nanotubes (tnt) prepared by anodization of ti foils were used for water splitting in a standalone cell. the concentration polarization between the anode side (1m naoh) and cathode side (0.5 m h2so4) ensured that the water splitting reaction could take place with no external bias and separate h2 and o2 evolution could be achieved. the destruction of tnt structures under 365 nm uv irradia...
متن کاملSulfated Titania Nanoparticles: an Efficient Catalyst for the Synthesis of Polyhydroquinoline Derivatives through Hantzsch Multicomponent Reaction
Sulfated titania nanoparticles (SO42-/TiO2 NPs) were synthesized using titanium tetraisopropoxide (TTIP) by the sol-gel method. The structure and morphology of the prepared nanocatalyst was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) methods as well as Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX) spectr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Interfaces
سال: 2021
ISSN: ['2196-7350']
DOI: https://doi.org/10.1002/admi.202101495