Special Issue Tool Steels. Machinability of Die Steels.

Die Steels and Improved Productivity in Die Casting

Solidification Phenomena and Properties of Some Cast Tool Steels

The freezing process. microstructures and phase relationships in some experimental cast tool steels have been investigated and developed under the various solidification conditions. Experimental steels were based on AISI M2 and M10 grades high speed steels. Addition of carbide forming elements such as niobium and titanium with and without extra carbon were made to the molten bath of the base st...

The Effect of Different Non-Metallic Inclusions on the Machinability of Steels

Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number a...

Problems in Repair-welding of Duplex-treated Tool Steels

Castings of aluminum and plastics are of high importance in the industrial world. They are usually made using permanent metallic moulds for pressure die-castings and injection molding. Die-tools are usually produced from chromium maraging hot work tool steel and are heat treated to hardness between 29 and 48 HRC, 1-3 . Die life is a mayor factor of a die-casting process and it strongly affects ...

Carbide Structure and Fracture Toughness of High Speed Tool Steels

In the present study, M2 high speed steels were fabricated by using electro-slag rapid remelting process. Carbide structure was analysed and the fracture toughness and hardness were also measured after austenitization treatment at 1190 and 1210C followed by tempering treatment at 535C for billets with various diameters from 16 to 60 mm. Electro-slag rapid remelting (ESRR) process is an advanced...