Special Issue “Advanced Phase Change Materials for Thermal Storage”
نویسندگان
چکیده
منابع مشابه
Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملThermal Transport in Phase Change Memory Materials
Phase change memory uses brief pulses of electrical current to induce phase transitions in chalcogenide material regions with dimensions near or even far below 50 nm. The strongly differing electrical conductivities of the crystalline and amorphous phases allow data storage at densities in excess of terabits per square inch. Nanoscale conduction heat transfer governs the figures of merit in the...
متن کاملThermal Management Using “ Dry ” Phase Change Materials
The thermal response characteristic of a hybrid cooler that is charged with a “dry” solid-solid phase change compound is evaluated. A mathematical model that simulates the performance of a cooler/heat storage unit is formulated. A prototype heat sink that incorporates heat storage using a “dry” PCM is tested, and used to benchmark the simulation model. Different heating and cooling strategies a...
متن کاملHigh Temperature Phase Change Materials for Thermal Energy Storage Applications: Preprint
To store thermal energy, sensible and latent heat storage materials are widely used. Latent heat thermal energy storage (TES) systems using phase change materials (PCM) are useful because of their ability to charge and discharge a large amount of heat from a small mass at constant temperature during a phase transformation. Because high-melting-point PCMs have large energy densities, their use c...
متن کاملThermal Peak Management Using Organic Phase Change Materials for Latent Heat Storage in Electronic Applications
Modern high power electronics devices consists of a large amount of integrated circuits for switching and supply applications. Beside the benefits, the technology exhibits the problem of an ever increasing power density. Nowadays, heat sinks that are directly mounted on a device, are used to reduce the on-chip temperature and dissipate the thermal energy to the environment. This paper presents ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2021
ISSN: 2076-3417
DOI: 10.3390/app11041390