Spatial system identification of a simply supported beam and a trapezoidal cantilever plate
نویسندگان
چکیده
منابع مشابه
Spatial system identification of a simply supported beam and a trapezoidal cantilever plate
Dynamic models of structural and acoustic systems are usually obtained by means of either modal analysis or finite element modeling. Detrimentally, both techniques rely on a comprehensive knowledge of the system’s physical properties. As a consequence, experimental data and a nonlinear optimization are required to refine the model. For the purpose of control, system identification is often empl...
متن کاملAnalysis of Thermal-Bending Stresses in a Simply Supported Annular Sector Plate
The present article deals with the analysis of thermal-bending stresses in a heated thin annular sector plate with simply supported boundary condition under transient temperature distribution using Berger’s approximate methods. The sectional heat supply is on the top face of the plate whereas the bottom face is kept at zero temperature. In this study, the solution of heat conduction is obtained...
متن کاملVibration Suppression of Simply Supported Beam under a Moving Mass using On-Line Neural Network Controller
In this paper, model reference neural network structure is used as a controller for vibration suppression of the Euler–Bernoulli beam under the excitation of moving mass travelling along a vibrating path. The non-dimensional equation of motion the beam acted upon by a moving mass is achieved. A Dirac-delta function is used to describe the position of the moving mass along the beam and its iner...
متن کاملSystem identification of a beam with frictional contact
The nonlinear system becomes an area with numerous investigations over the past decades. The conventional modal analysis could not be applied on nonlinear continuous system which makes it impossible to construct the reduced order models and obtain system response based on limited number of measurement points. Nonlinear normal modes provide a useful tool for extending modal analysis to nonlinea...
متن کاملNonlinear Vibration Analysis of a cantilever beam with nonlinear geometry
Analyzing the nonlinear vibration of beams is one of the important issues in structural engineering. According to this, an impressive analytical method which is called Modified Iteration Perturbation Method (MIPM) is used to obtain the behavior and frequency of a cantilever beam with geometric nonlinear. This new method is combined by the Mickens and Iteration methods. Moreover, this method don...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Control Systems Technology
سال: 2003
ISSN: 1063-6536
DOI: 10.1109/tcst.2003.816415