Spatial Modulation for Joint Radar-Communications Systems: Design, Analysis, and Hardware Prototype
نویسندگان
چکیده
Dual-function radar-communications (DFRC) systems implement radar and communication functionalities on a single platform. Jointly designing these subsystems can lead to substantial gains in performance as well size, cost, power consumption. In this paper, we propose DFRC system, which utilizes generalized spatial modulation (GSM) realize coexisting communications waveforms. Our proposed GSM-based scheme, referred based communication-radar (SpaCoR) allocates antenna elements among the transmitted message, thus achieving increased rates by embedding additional data bits selection. We formulate resulting signal models, present dedicated processing scheme. To evaluate performance, characterize statistical properties of transmit beam pattern. Then, hardware prototype demonstrating feasibility results show that GSM system achieves improved compared techniques utilizing fixed allocations operating at same rate. For subsystem, our experiments agility induced transmission improves angular resolution reduces sidelobe level pattern using allocations.
منابع مشابه
On the Frame Design for Joint OFDM Radar and Communications
We discuss how to design OFDM signals which are suitable for both radar and communications using high-bandwidth OFDM signals. A list of constraints which the signal configuration must comply with is defined. We present a solution which satisfies the requirements for radar and allows for reliable communications.
متن کاملA Sub-Nyquist Radar Prototype: Hardware and Software
We introduce a full hardware implementation and demo of a sub-Nyquist radar receiver. Our system demonstrates pulse-Doppler radar transmission and reception at sub-Nyquist rates. Specifically, we sample the received radar signal at 1/20 the Nyquist rate, while still perfectly detecting the targets in the delayDoppler plane. In addition our system filters clutter interference from the sub-Nyquis...
متن کاملA Sub-Nyquist Radar Prototype: Hardware and Algorithms
Traditional radar sensing typically involves matched filtering between the received signal and the shape of the transmitted pulse. Under the confinement of classic sampling theorem this requires that the received signals must first be sampled at twice the baseband bandwidth, in order to avoid aliasing. The growing demands for target distinction capability and spatial resolution imply significan...
متن کاملMultistatic cloud radar systems: joint sensing and communication design
In a multistatic cloud radar system, receive sensors measure signals sent by a transmit element and reflected from a target and possibly clutter, in the presence of interference and noise. The receive sensors communicate over non-ideal backhaul links with a fusion center, or cloud processor, where the presence or absence of the target is determined. The backhaul architecture can be characterize...
متن کاملWaveform Design using Second Order Cone Programming in Radar Systems
Transmit waveform design is one of the most important problems in active sensing and communication systems. This problem, due to the complexity and non-convexity, has been always the main topic of many papers for the decades. However, still an optimal solution which guarantees a global minimum for this multi-variable optimization problem is not found. In this paper, we propose an attracting met...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Vehicular Technology
سال: 2021
ISSN: ['0018-9545', '1939-9359']
DOI: https://doi.org/10.1109/tvt.2021.3056408