Spaced TiO2 nanotube arrays allow for a high performance hierarchical supercapacitor structure
نویسندگان
چکیده
منابع مشابه
Spaced Titania Nanotube Arrays Allow the Construction of an Efficient N‐Doped Hierarchical Structure for Visible‐Light Harvesting
Regularly spaced TiO2 nanotubes were prepared by anodizing a titanium substrate in triethylene glycol electrolyte at elevated temperature. In comparison to conventional TiO2 nanotubes, spaced nanotubes possess an adjustable spacing between the individual nanotubes; this allows for controlled buildup of a hierarchical nanoparticle-on-nanotube structure. Here, we use this principle for layer-by-l...
متن کاملCoaxial PANI/TiN/PANI nanotube arrays for high-performance supercapacitor electrodes.
Coaxial PANI/TiN/PANI nanotube arrays prepared by electrochemical polymerization of PANI on nanoporous TiN nanotube arrays exhibit a high specific capacitance of 242 mF cm(-2), excellent rate capability with the capacitance remaining at 69% when the current density is increased 50 times from 0.2 to 10 mA cm(-2), and a long cycling life with less than 0.005% decay per cycle.
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملConstruction of Hierarchical CuO/Cu2O@NiCo2S4 Nanowire Arrays on Copper Foam for High Performance Supercapacitor Electrodes
Hierarchical copper oxide @ ternary nickel cobalt sulfide (CuO/Cu₂O@NiCo₂S₄) core-shell nanowire arrays on Cu foam have been successfully constructed by a facile two-step strategy. Vertically aligned CuO/Cu₂O nanowire arrays are firstly grown on Cu foam by one-step thermal oxidation of Cu foam, followed by electrodeposition of NiCo₂S₄ nanosheets on the surface of CuO/Cu₂O nanowires to form the ...
متن کاملTiO2 nanotube arrays annealed in CO exhibiting high performance for lithium ion intercalation
Anatase titania nanotube arrays were fabricated by means of anodization of Ti foil and annealed at 400 ◦C in respective CO and N2 gases for 3 h. Electrochemical impendence spectroscopy study showed that CO annealed arrays possessed a noticeably lower charge-transfer resistance as compared with arrays annealed in N2 gas under otherwise the same conditions. TiO2 nanotube arrays annealed in CO pos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Chemistry A
سال: 2017
ISSN: 2050-7488,2050-7496
DOI: 10.1039/c6ta10179h