Sound propagation in amorphous metallic Ni-P

Hidden amorphous phase and reentrant supercooled liquid in Pd-Ni-P metallic glasses

An anomaly in differential scanning calorimetry has been reported in a number of metallic glass materials in which a broad exothermal peak was observed between the glass and crystallization temperatures. The mystery surrounding this calorimetric anomaly is epitomized by four decades long studies of Pd-Ni-P metallic glasses, arguably the best glass-forming alloys. Here we show, using a suite of ...

Amorphous metallic foam

The bulk glass forming alloy Pd43Ni10Cu27P20 is processed into a low-density amorphous metallic foam. Pd43Ni10Cu27P20 is mixed with hydrated B2O3 , which releases gas at elevated temperature and/or low pressure. Very homogeneous foams are achieved due to the high viscosity of the alloy even at its liquidus temperature. By processing at the liquidus temperature and decreasing the pressure to 10 ...

DYNAMICAL SIMULATION OF UNDERWATER SOUND PROPAGATION IN THE HORMOZ STRAIT

Providing an illustration of sound propagation in the Hormoz Strait ,this paper is about acoustic wave propagation in shallow water for a harmonic point source with low frequency, less than 1000 and solution of a homogenous Helmholtz equation using parabolic equation. C++ programming is used to solve Helmholtz equation [9] and MATLAB software is used to illustrate figures and animate them [6], ...

Formation and Properties of Ni-Based Amorphous Metallic Coating Produced by HVAF Thermal Spraying

A highly dense Ni59Zr20Ti16Si2Sn3 partial amorphous metallic coating, about 500mm thick, was fabricated by means of HVAF (High Velocity Air Fuel) thermal spraying. Amorphous alloy powders produced by using gas atomization were used for HVAF thermal spraying to produce an amorphous metallic coating. Microstructural investigation showed that crystallization and oxidation occurred during thermal s...

Properties using metallic amorphous ribbons from (Fe-Co-Ni)- metalloid system, obtained by melt-quenching