Some Properties of WC-TaC-Co and WC-Tic-Co Alloys affected by Low Temperature Annealing
نویسندگان
چکیده
منابع مشابه
TEM INVESTIGATIONS OF WC-Co ALLOYS AFTER CREEP EXPERIMENTS
Carbide tungsten cobalt alloys were deformed in compression or in three point bending in a temperature range 1000-1350°C and in a stress domain 30-1000MPa. In these conditions, the stress exponent n of WC-CO alloys is a function of only the cobalt volurnic ratio and tends tow rds n = 1 for pure B carbide. The apparent activation energy is 550 kj mole. T.E.M. investigations on pure carbide defor...
متن کاملبررسی رفتار سایشی کامپوزیت‌های WC-10wt%Co تجاری، WC-40vol%Co و WC-40vol%FeAl-B در دمای محیط
در این پژوهش رفتار سایشی کامپوزیت‌های تجاری WC-10wt%Co (H10F)، WC-40vol%Co و کامپوزیت‌های WC-40vol%FeAl-B با مقادیر مختلف بور از صفر تا ppm1000 به روش پین روی دیسک بررسی شد. آزمون‌های سایش در دمای محیط، تحت بار 40 نیوتن و طی مسافت 100 متر انجام شدند. سطوح سایش به وسیله میکروسکوپ الکترونی روبشی (SEM) مورد بررسی قرار گرفت. نتایج نشان داد که در بین نمونه‌ها، کامپوزیت WC-40vol%FeAl بدون بور کمترین ...
متن کاملThe Hardness and Strength Properties of WC-Co Composites
The industrially-important WC-Co composite materials provide a useful, albeit complicated materials system for understanding the combined influences on hardness and strength properties of the constituent WC particle strengths, the particle sizes, their contiguities, and of Co binder hardness and mean free paths, and in total, the volume fraction of constituents. A connection is made here betwee...
متن کاملThermophysical properties of Co-free WC-FeCr hardmetals
Fe-Cr alloys can potentially replace carcinogenic Co as the binder system in WC-hardmetals. Furthermore, they may be used in emerging applications such as nuclear fusion reactor shielding, where use of Co is forbidden due to the formation of hazardous activated species. In such applications, a good understanding of thermophysical properties is critical to predicting high temperature performance...
متن کاملAnnealing effect on the mechanical properties of ultrafine WC–Co materials
In dry machining, the tool-chip interface temperature is a critical factor affecting the engineering performance of WC–Co tools. As the temperature variation of the cutting tool in dry machining is similar to that in annealing process, the effect of tool-chip interface temperature on the mechanical properties of cutting tool materials in dry machining can be studied by means of annealing experi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1965
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.12.33