Solution Processed NiO/MoS2 Heterostructure Nanocomposite for Supercapacitor Electrode Application
نویسندگان
چکیده
Metal oxide and metal dichalcogenide heterostructure composites are promising candidates for electrochemical use. In this study, a hybrid composite electrode material was made using straightforward hydrothermal process transition (NiO) (MoS2). The surface of the flower-like structured MoS2 grown with granular NiO, exhibited considerably improved specific capacitance when compared to pure NiO materials. pseudocapacitive performance effectively supported by combination (TMOs) (MDC), which greatly ion transport within storage. At current density 1 A/g, prepared 289 F/g, and, after 2000 cycles, retained 101% its initial value. symmetric device constructed put through tests LED light. This finding opens up new avenue quickly increasing field
منابع مشابه
A Solution Processed Flexible Nanocomposite Electrode with Efficient Light Extraction for Organic Light Emitting Diodes
Highly efficient organic light emitting diodes (OLEDs) based on multiple layers of vapor evaporated small molecules, indium tin oxide transparent electrode, and glass substrate have been extensively investigated and are being commercialized. The light extraction from the exciton radiative decay is limited to less than 30% due to plasmonic quenching on the metallic cathode and the waveguide in t...
متن کاملSynthesis and Electrochemical Analysis of Algae Cellulose-Polypyrrole-Graphene Nanocomposite for Supercapacitor Electrode.
A novel nanocomposite has been developed using extracted cellulose from marine algae coated with conductive polypyrrole and graphene nanoplateletes. The nanocomposite fabricated via in situ polymerization was used as an electrode for a supercapacitor device. The nanocomposite material has been electrochemically characterized using cyclic voltammetry to test its potential to super-capacitive beh...
متن کاملHIGH PERFORMANCE SUPERCAPACITOR ELECTRODE MATERIAL BASED ON FLOWER LIKE MoS2/REDUCED GRAPHENE OXIDE NANOCOMPOSITE
A simple and cost effective hydrothermal method has been done for the synthesis of MoS2 and MoS2/rGO nanocomposites. The prepared MoS2/rGO composite was characterized by XRD, FESEM and TEM which revealed the formation and as well as the morphological scenario of MoS2/rGO nanocomposite. Pure MoS2 and MoS2/rGO nanocomposite show 3D hierarchical flowery architecture where rGO nanosheets were inter...
متن کاملfabricating electrospun poly(3-hydroxybutyrate)/hydroxyapatite nanocomposite scaffold for tissue engineering application
. در رســاله ی حاضر، ابتدا داربست نانوالیاف سه بعدی متخلخل به روش الگوبرداری تصویری شبیه سازی شد. با استفاده از طراحی آزمایش به روش تاگوچی پس از ساخت داربست های پلی (3- هیدروکسی بوتیرات) (p3hb) شناسایی رفتار پارامترهای موادی مثل لزجت سیال پلیمر، فراریت و رسانایی الکتریکی محلول پلیمری و پارامترهای دستگاهی مثل دبی حجمی سیال، ولتاژ الکتریکی و فاصله نازل تا جمع کننده صورت گرفت. بعد از محاسبه ی خصوص...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2022
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en16010335