Solidification morphology and phase selection in drop-tube processed Ni–Fe–Si intermetallics

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Solidification morphology and phase selection in drop-tube processed Ni-Fe-Si intermetallics

Drop-tube processing was used to rapidly solidify droplets of Ni64.7Fe10Si25.3 and Ni59.7Fe15Si25.3 alloys. In the larger droplets, and therefore at low cooling rates, only two phases, け-Ni31Si12 and く1-Ni3Si were observed. Conversely, in the smaller droplets, and therefore at higher cooling rates, the metastable phase Ni25Si9 was also observed. The critical cooling rate for the formation of Ni...

متن کامل

Lamella structure formation in drop-tube processed Ni-25.3 at.% Si alloy

Rapid solidification experiments have been performed on an Ni-25.3 at.% Si alloy using drop tube techniques. The dominant phase formed is found to be Ni25Si9, with Ni31Si12 and く1-Ni3Si also being present. SEM and TEM analysis revealed a novel eutectic structure consisting of lamellar of metastable Ni25Si9 and く1-Ni3Si, the width of these being around 200 nm and 20 nm respectively. This result ...

متن کامل

Orientation selection in solidification patterning

Crystal growth has been recognized as a paradigm for non-equilibrium pattern formation for decades. Scientific interest in this field has focused on the growth rates and curvature of branches in snowflake-like structures patterned after a solid’s crystallographic orientations. In reality, there exists a much richer variety of crystal patterns in nature. Investigations of dendritically solidifyi...

متن کامل

In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification

Real-time in situ synchrotron X-ray tomographic microscopy was used to gain new insights into and quantify the nucleation mechanisms and growth kinetics of b-Al5FeSi intermetallics during solidification of an aluminium Al–7.5Si–3.5Cu–0.6Fe (wt.%) alloy. Three new insights were obtained. First, the plate-like b-intermetallics appeared to nucleate mainly on or near the primary aluminium dendrites...

متن کامل

morphology, geochemistry, mineralogy, and micromorphology of soils of hormozgan province in relation to parent materials

ویژگی های زمین شیمیایی، کانی شناسی، و میکرومورفولوژیکی خاک ها و سنگ مادر مربوطه در منطقه بین بخش های جنوبی زاگرس و خلیج فارس تا دریای عمان(استان هرمزگان، ایران) مورد بررسی قرار گرفت. هدف های این مطالعه شناسایی تغییرات در خصوصیات فیزیکی، شیمیایی، و ترکیب کانی شناسی خاک، مطالعه میکرومورفولوژی و تکامل خاک، و بررسی توزیع عنصر خاک بر اساس هوازدگی، پروسه های خاک و زمین شناسی جهت توصیف اثرات مواد مادر...

15 صفحه اول

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Intermetallics

سال: 2015

ISSN: 0966-9795

DOI: 10.1016/j.intermet.2015.01.006