Solidification and Forming Technology of Minute Scrap Metal by Semisolid Process
نویسندگان
چکیده
منابع مشابه
Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation
In this paper, the drawing process of multi-layer sheet metal through wedge shaped die has been analyzed using stream function and upper bound method. Typically a sandwich sheet contains three layers of metal, where the outer layers are of the same thickness and material and different from those of the inner layer. In this study, a new deformation model has been introduced in which inlet and ou...
متن کاملINFLUENCE OF THE PRIMARY SOLIDIFICATION ON THE SECONDARY SOLIDIFICATION DURING SEMISOLID METAL (SSM) PROCESSING OF A356.0 ALUMINUM ALLOY BY MECHANICAL STIRRING
Abstract: The aims of this research were to investigate the effects of semisolid metal (SSM) processing parameters (i.e., shear rates –times – temperatures combinations) on the primary solidification products and isothermal holding duration, subsequent to cessation of stirring on the secondary solidification of Al-Si (A356) alloy. The dendrite fragmentation was found to be the governing m...
متن کاملInvestigation of hot metal gas forming process of square parts
Aluminum alloys are considered a lot in the automotive and aerospace industry because of their high strength to weight ratio. In this manuscript, the gas forming process of aluminum AA6063 tubes at high temperatures up to 500°C is investigated, through experimental and numerical tests. Therefore, an experimental setup is prepared and so, tube specimens are formed in a die with square cross sect...
متن کاملA Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology
In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possib...
متن کاملA Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology
In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possib...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Solid Mechanics and Materials Engineering
سال: 2009
ISSN: 1880-9871
DOI: 10.1299/jmmp.3.227