Solid Particle Erosion of Brittle Materials (Part4)

Solid Particle Erosion on Different Metallic Materials

Solid Particle Erosion of Thermal Sprayed Coatings

Solid particle erosion is an important material degradation mechanism. Although various methods of coating are tried and used for protection against erosion, thermal sprayed coating for such purpose is the most widely used method. In this chapter, evolution of thermal sprayed coating, erosion testing methods, and erosive wear of thermal sprayed coatings are discussed extensively with emphasis o...

Modeling Solid-Particle Erosion of Ductile Alloys

properties for erosion protection. Hardness is the most SOLID-particle erosion is a loss of material during repetwidely used property to correlate with the erosion rates of itive impacts of solid particles and is one of the primary materials. For pure metals, some correlation between erosion reasons for fly ash–borne damage of power generation comrate and hardness has been shown.[4] However, se...

Solid particle erosion of Bagasse fiber reinforced epoxy composite

Experiments were carried out to study the effects of impingement angle and particle velocity on the solid particle erosion behavior of Bagasse Fiber Reinforced Polymer Composites (BFRPCs). The erosive wear is evaluated at different impingement angles from 30° to 90° at four different velocities of 48, 70, 82 and 109 m/s. The erodent used is silica sand with the size range 150 – 250 m of irregul...

The process (mechanism) of erosion of soluble brittle materials caused by cavitation.

This research determines which of the phenomena that appear during cavitation are responsible for the erosion of some brittle water soluble materials, such as gypsum and alum, when exposed to a high intensity ultrasound field over the cavitation level. The observation that gypsum suffers no erosion under the effect of an ultrasound field when the material is irradiated in a saturated solution o...