Soldering of non-wettable Al electrode using Au-based solder
نویسندگان
چکیده
منابع مشابه
Solder doped polycaprolactone scaffold enables reproducible laser tissue soldering.
BACKGROUND AND OBJECTIVES In this in vitro feasibility study we analyzed tissue fusion using bovine serum albumin (BSA) and Indocyanine green (ICG) doped polycaprolactone (PCL) scaffolds in combination with a diode laser as energy source while focusing on the influence of irradiation power and albumin concentration on the resulting tensile strength and induced tissue damage. MATERIALS AND MET...
متن کاملCross-interaction of Interfacial Reactions in Ni (au/ni/cu)-snag-cu Solder Joints during Reflow Soldering and Thermal Aging
The coupling effect of interfacial reactions between two pads in Ni-SnAg-Cu and Au/Ni/Cu-SnAg-Cu solder joints was investigated in this paper. After reflow soldering, a large amount of Cu can diffuse across the solder joint to the opposite pad to form (Cu,Ni)6Sn5 IMC on the Ni pad in Ni-SnAg-Cu solder joint. A little Ni can also be detected in Cu6Sn5 layer, which contains some trapped solder, o...
متن کاملEffects of solder volume on formation and redeposition of Au- containing intermetallics in Au/Ni-SnAgCu-Ni(P) solder joints
SnAgCu is one of the most promising candidates for lead-free solders to replace conventional eutectic SnPb solders. The effects of solder volume on interfacial reactions and microstructure evolution in Au/Ni-SnAgCu-Ni(P) solder joints have been investigated under soldering and thermal aging conditions. The results show that solder volume has a strong effect on the formation of Au-containing int...
متن کاملEffects of Solder Volume on Formation and Redeposition of Au-Containing Intermetallics in Ni/Au-SnAgCu-Ni(P) Solder Joints
SnAgCu is one of the most promising candidates for lead-free solders to replace conventional eutectic SnPb solders. The effects of solder volume on interfacial reactions and microstructure evolution in Ni/Au-SnAgCu-Ni(P) solder joints have been investigated under soldering and thermal aging conditions. The results show that solder volume has a strong effect on the formation of Au-containing int...
متن کاملThermo-Mechanical Characterization of Skin Laser Soldering using Au Coated SiO2 Nanoshells
Gold coated silica core nanoparticles have an optical response dictated by the plasmon resonance. The wavelength at which the resonance occurs depends on the core and shell sizes, allowing nanoshells to be tailored for particular applications. The purposes of this study was to synthesize and use different concentration of gold nanoshells as exogenous material for skin tissue soldering and also ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Gold Bulletin
سال: 2013
ISSN: 2190-7579
DOI: 10.1007/s13404-013-0130-9