Soldering of Mg Joints Using Zn-Al Solders
نویسندگان
چکیده
منابع مشابه
Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy
Based on the idea of alloying welding seams, a series of Zn-xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded join...
متن کاملCREEP AGE FORMING OF Al-Zn-Mg ALLOYS WITH OPTIMIZATION OF MECHANICALl PROPERTIES
Creep age forming (CAF) is one of the novel methods in aerospace industry that has been used to manufacture components of panels with improved mechanical properties and reduced fabrication cost. CAF is a combined age-hardening and stress-relaxation that are responsible for strengthening and forming, respectively. This paper deals with the experimental investigations of mechanical and springback...
متن کاملCORROSION FATIGUE CRACK PROPAGATION AND INHIBITION IN Al-Zn-Mg-Cu VS Al-Cu-Mg/Li ALLOYS
Age-hardenable aluminum alloys used in aerospace structures are susceptible to environment assisted fatigue crack propagation (EFCP), limiting component durability and safety. The objective is to quantitatively understand EFCP and its inhibition for important aerospace alloys: 7075-T651 (Al-Zn-Cu-Mg), C433-T3 (Al-Cu-Mg), and C47A-T86 (AlCu-Li). EFCP is understood through the hydrogen embrittlem...
متن کاملبررسی رفتار تغییر شکل گرم آلیاژ mg-al-zn
آلیاژهای منیزیم به دلیل خواص ویژه از جمله وزن کم و نسبت استحکام به وزن بالا مورد توجه روزافزون صنایع خودروسازی و هوا- فضا قرار گرفته است. کارپذیری پایین آلیاژهای منیزیم در دمای اتاق منجر به گسترش فرآیندهای شکل دهی در دمای بالا گردیده است. ازین رو در پژوهش حاضر به منظور بررسی رفتار تغییر شکل گرم آلیاژ منیزیمaz63 ، آزمایش فشار گرم در بازه دمایی ?450-250 و نرخ کرنش های مختلفs-1 1-001/0 بر روی نمون...
15 صفحه اولINTERACTIONS OF Cu-SUBSTRATES WITH TITANIUM-ALLOYED Sn-Zn SOLDERS
The interactions of copper substrate with titanium-alloyed Sn-Zn eutectic solders have been studied. Two series of experiments have been performed. The first one consisted in differential thermal analyses of Sn-Zn nearly eutectic alloys containing from 1.3 to 2.2 wt. % Ti. Diffusion couples consisted of Cu-wires and Sn-Zn-Ti liquid solders, produced at 250 and 275 OC have been prepared in the s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2018
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-018-4617-0