Soldering of aluminum alloy 6063 to copper with ultrasonic vibration
نویسندگان
چکیده
منابع مشابه
Soldering of Aluminum Matrix Composites Sicp/a356 and Kovar Alloy
Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...
متن کاملThe influence of ultrasonic-vibration on hot upsetting of aluminum alloy.
The traditional ultrasonic apparatus cannot be operated at high temperature, explaining why the effect of ultrasonic-vibration on high temperature metal forming has seldom been addressed in literature. This study establishes an ultrasonic-vibration hot upsetting system. A cooling mechanism is used to solve the problem of high temperature. The effects of temperature and strain rate during ultras...
متن کاملAcoustic Characteristics of Fatigued Aluminum Alloy Using Ultrasonic Shear Waves
Cyclic-tension fatigue of aluminum alloy, Al-4Cu-1Mg, was determined by an analysis of diffracted SH and SV waves, passing through the surface and reflecting the bottom of the specimen, respectively. The internal friction of SV waves begins to increase from fatigue damage ratio(=N/Nf) of 0.5. This suggests increase of movable dislocation. From the analysis of SH waves, the logarithmic damping r...
متن کاملEffect of Die Entry Angle on Extrusion Responses of Aluminum 6063 Alloy
Mechanical properties response of extruded 6063 aluminum alloy at varied die entry angle has been investigated. Plain carbon and tool steel dies with entry angles of 15, 30, 45, 60, 75 and 90 were simulated. Extrusion on the alloy was done at ambient temperature (37C) and the extruded samples from the various angles were subjected to selected service related mechanical tests and microstructural...
متن کاملEffects of Heat Treatment on Strength and Ductility of Rolled and Forged Aluminum 6063 Alloy
This work examines the effect of heat treatment on tensile strength and ductile responses of rolled and forged AA6063 aluminum alloy. Some cast samples were rolled while some were forged at ambient temperature (32C). The deformed samples were subjected to heat treatment processes. The tensile strengths of rolled (212 MPa) and forged (127 MPa) samples are enhanced at ambient temperature but with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2003
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.53.245