SOLAR DISTILLER WITH FLAT PLATE COLLECTOR AND THERMAL STORAGE
نویسندگان
چکیده
منابع مشابه
Modeling of Flat-Plate Solar Collector Operation in Transient States
Saleh, Ahmad M. M.S.E., Purdue University, May 2012. Modeling Of Flat-Plate Solar Collector Operation in Transient States. Major Professor: Hosni Abu-Mulaweh. Solar energy is becoming an alternative for the limited fossil fuel resources. One of the simplest and most direct applications of this energy is the conversion of solar radiation into heat, which can be used in water heating systems. A c...
متن کاملDesign and Development of Compound Parabolic Concentrating Solar Collector with Flat Plate Absorber
In this research work 2-D CPC (Compound Parabolic Concentrator) with flat plate absorber and two parabolic reflectors is first designed and then fabricated for thermal performance analysis. Here the incident rays, after reflection from the reflector, are not focused at a point but are simply collected on a line of absorber surface. Acrylic sheets are provided to reduce the heat loss. Flat plate...
متن کاملexergy analysis of a flat plate solar collector in combination with heat pipe
the use of solar collectors in combination with heat pipes is rapidly growing in recent years.heat pipes, as heat transfer components, have undeniable advantages in comparison with other alternatives. the most important advantage is their high rate of heat transfer at minor temperature differences. although there have been numerous studies on the heat analysis or first thermodynamic analysis of...
متن کاملTheoretical Model of a Flat Plate Solar Collector Integrated with Phase Change Material
Abstract—The objective of this work was to develop a theoretical model to study the dynamic thermal behavior of a flat plate solar collector integrated with a phase change material (PCM). The PCM acted as a heat source for the solar system during low intensity solar radiation and night. The energy balance equations for the various components of the collector as well as for the PCM were formulat...
متن کاملdesign, construction and evaluation of solar flat-plate collector simulator based on the thermohydraulic coefficient
introduction increasing the area of absorber plate between the flowed air through the duct can be accomplished by corrugating the absorber plate or by using the artificial roughness underside of the absorber plate as the commercial methods for enhancing the thermohydraulic performance of the flat plate solar air heaters. evaluation of this requires the construction of separated solar air heater...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Conference on Applied Mechanics and Mechanical Engineering
سال: 2016
ISSN: 2636-4360
DOI: 10.21608/amme.2016.35260