Sol-Gel Chemistry in Biosensing Devices of Electrical Transduction: Application to CEA Cancer Biomarker

Electrical properties of Al 2 O 3 films for TFEL - devices made with Sol - Gel technology

Thin films of Al2O3 have been deposited on ITO-coated glass substrates by a sol-gel dipcoat process. Aluminium isopropoxide (Al(OC3H7)3) was used as the Al source material. X-ray diffraction measurements show that these films are amorphous. Scanning electron microscopy and atomic force microscopy images of the films have revealed a relatively flat surface with no cracks. The dielectric properti...

In-situ Sol-gel Modification of Pdms Electrophoretic Analytical Devices

This paper reports on a rapid new method for in-situ sol-gel deposition of silica layers in PDMS microchannels. A two-step process is used; first allowing TEOS to diffuse briefly into the channel, followed by acid catalysed hydrolysis and condensation. The silica coating results in an increased and stabilised electroosmotic flow. With this novel method there is no need for pretreatment of the m...

The Power of Non-Hydrolytic Sol-Gel Chemistry: A Review

This review is devoted to non-hydrolytic sol-gel chemistry. During the last 25 years, non-hydrolytic sol-gel (NHSG) techniques were found to be attractive and versatile methods for the preparation of oxide materials. Compared to conventional hydrolytic approaches, the NHSG route allows reaction control at the atomic scale resulting in homogeneous and well defined products. Due to these features...

Chemistry and Fundamentals of the Sol–Gel Process

Introduction to Sol-Gel