Soil-corrosion studies - Nonferrous metals and alloys, metallic coatings and specially prepared ferrous pipes removed in 1930

Corrosion of Metals and Alloys

Although all metals are subjected to the general oxidation reaction (I), the tendencies to ionize differ from metal to metal. When two metals are exposed to an aquenous environment and release electrons according to reaction (I) , an electric potential is induced the standard value of which can be measured when the metals are in 1-molar solutions of their own salts at a predetermined temperatur...

accumulation of heavy metals (cu, zn, cd and pb) in sediment and selected organisms in lukut river, negrisembilan, malaysia, and toxocological studies of heavy metals (cu, zn, cd and pb) on penaeus monodon (fabricius, 1798) juveniles

چکیده ندارد.

The Effect of Cross Rolling on the Microstructure of Ferrous and Non-ferrous Metals and Alloys

A.B. Naizabekov, S.N. Lezhnev, Rudny Industrial Institute, Rudny, Kazakhstan; H. Dyja, T. Bajor, Czestochowa University of Technology, Czestochowa, Poland; K. Tsay, Institute of Nuclear Physics of the National Nuclear Center of the Republic of Kazakhstan, Almaty, Kazakhstan; A. Arbuz, N.Gusseynov, R. Nemkaeva Al-Farabi Kazakh National University, Almaty, Kazakhstan The cross rolling is the one ...

Electrodeposition of Alloys Coatings from Electrolytic Baths Prepared by Recovery of Exhausted Batteries for Corrosion Protection

Corrosion behavior of metals and alloys in marine-industrial environment.

This work deals with atmospheric corrosion to assess the degrading effects of air pollutants on ferrous and non-ferrous metals and alloys, which are mostly used as engineering materials. An exposure study was conducted in the Tuticorin port area located on the east coast of South India, in the Gulf of Mannar with Sri Lanka to the southeast. Common engineering materials, namely mild steel, galva...