Sodium potassium niobate (K0.5Na0.5NbO3, KNN) thick films by electrophoretic deposition
نویسندگان
چکیده
منابع مشابه
Environmental Friendly Potassium Sodium Niobate Based Thin Films from Solutions
We present the synthesis of ~250 nm thick K0.5Na0.5NbO3 thin films on platinized silicon substrates from alkoxide-based solutions with the stoichiometric composition and with the 5 or 10 mole % potassium acetate excess. The films crystallized into a pure perovskite phase, but depending on the amount of the alkali excess in solutions, they consisted of ~50 nm or of ~200 nm large grains. The fine...
متن کاملSintering of Lead-Free Piezoelectric Sodium Potassium Niobate Ceramics
The potassium sodium niobate, K0.5Na0.5NbO₃, solid solution (KNN) is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this rea...
متن کاملElectrophoretic Deposition of Hydroxyapatite
The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...
متن کاملKinetic investigation of carbon nanotube deposition by DC electrophoretic technique
In this paper, kinetics of DC electrophoretic deposition EPD of carbon nanotubes CNTs is investigated. Carbon nanotubes suspended in pure ethanol with addition of magnesium nitrate was used as deposition media. The effect of main EPD parameters such as deposition time, applied voltage and the CNT concentration on deposit yield was investigated. The variation of current density vs. time and the ...
متن کاملThe effect of titanium dioxide and molybdenum oxide on the properties of sodium potassium niobate piezoceramic
Sodium potassium niobate piezoceramics are considered as lead-free piezoelectric due to their good properties. In this study, the effect of titanium dioxide and molybdenum oxide as dopant on the densification behavior, piezoelectric and dielectric properties of lithium doped sodium potassium niobate ((K0.5Na0.5)0.94Li0.06NbO3, KNNL) was investigated. For this purpose, (K0.5Na0.5)0.94Li0.06Nb0.9...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2015
ISSN: 2046-2069
DOI: 10.1039/c4ra11058g