منابع مشابه
Modelling Valve Stiction 1
The presence of nonlinearities, e.g., stiction, and deadband in a control valve limits the control loop performance. Stiction is the most commonly found valve problem in the process industry. In spite of many attempts to understand and model the stiction phenomena, there is a lack of a proper model, which can be understood and related directly to the practical situation as observed in real valv...
متن کاملQuantification of Valve Stiction
Oscillations in control loops lead to poor controller performance. Stiction in control valves is one of the major causes of such oscillations. Therefore, the correct diagnosis of stiction is important. There are several methods for detecting stiction, but quantification of stiction still remains a challenge. Two parameters are used to model the stiction phenomenon successfully, namely, deadband...
متن کاملSuppression of Stiction in MEMS
Stiction failures in microelectromechanical systems (MEMS) occur when suspended elastic members are unexpectedly pinned to their substrates. This type of device failure develops both in fabrication and during device operation, being a dominant source of yield loss in MEMS. Stiction failures require first a collapse force that brings the elastic member contact with the substrate followed by an i...
متن کاملDetection and Quantification of Control Valve Stiction
Stiction is one of the most common problems in the spring-diaphragm type control valves, which are widely used in the process industry. Although there have been many attempts to understand and detect stiction in control valves, none of the current methods can simultaneously detect and quantify stiction. There is thus a clear need in the process industry for a non-invasive method that can not on...
متن کاملModified PI Controller for Stiction Compensation
Stiction is a well known problem of the process performance. Compensate its effect is essential, because most of sticky valves cannot be replaced and they remain working for months or years. The scope of this work is to propose a novel methodology to compensate stiction effects, through the modification of the controller (PI) block in the control loop. The proposed approach is based on the two ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Robotics & Automation Engineering Journal
سال: 2019
ISSN: 2577-2899
DOI: 10.19080/raej.2019.04.555641