Small-angle neutron scattering study of the miscibility of metallocene-catalyzed octene linear low-density polyethylene and low-density polyethylene blends
نویسندگان
چکیده
منابع مشابه
Influence of Branching Characteristics on Thermal and Mechanical Properties of Ziegler–Natta and Metallocene Hexene Linear Low-Density Polyethylene Blends with Low-Density Polyethylene
The effect of the branch content (BC) and composition distribution (CD) of linear low-density polyethylene (LLDPE) on the thermal and mechanical properties of its blends with LDPE were studied. All blends and pure resins were conditioned in a Haake PolyDrive blender at 190°C and in the presence of adequate amounts of antioxidant. Two metallocene LLDPEs (m-LLDPE) and one Ziegler–Natta (ZN) hexen...
متن کاملEvaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene
Ethylene / 1-butene copolymers at different comonomer levels were synthesized using Ziegler-Natta catalyst to evaluate the applicability of thermal fractionation methods in predicting chemical composition distribution (CCD). The continuous melting endotherms by DSC were converted to continuous CCD, and the average comonomer contents were compared with NMR results. DSC underestimated comonomer c...
متن کاملTensile and impact behavior of polypropylene/low density polyethylene blends
Blends of polypropylene (PP) and low-density polyethylene (LDPE) may contribute to make recycling more economically attractive. The aim of this work was to make PP/LDPE blends (0/100, 25/75, 50/50, 75/25 and 100/0 w/w) via injection molding carried out under various injection temperatures and to evaluate their tensile and impact properties. The blends yielded tensile stress–strain curves very d...
متن کاملGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Crystallography
سال: 2009
ISSN: 0021-8898
DOI: 10.1107/s0021889809002854