Slow crack growth and reliability of dental ceramics
نویسندگان
چکیده
منابع مشابه
Creep-assisted slow crack growth in bio-inspired dental multilayers.
Ceramic crown structures under occlusal contact are often idealized as flat multilayered structures that are deformed under Hertzian contact loading. Previous models treated each layer as linear elastic materials and resulted in differences between the measured and predicted critical loads. This paper examines the combined effects of creep (in the adhesive and substrate layers) and creep-assist...
متن کاملSlow-Crack-Growth Behavior of Zirconia-Toughened Alumina Ceramics Processed by Different Methods
A study of slow-crack propagation in zirconia-toughened alumina (ZTA) ceramics is presented. Different ZTA composites, using either unstabilized or yttria-stabilized zirconia, have been tested. The materials were prepared in the range 0–15 vol% ZrO2, using two processing methods: powder mixing and a modified colloidal route. Crack propagation tests have been conducted for crack velocities from ...
متن کاملSlow crack growth: models and experiments
The properties of slow crack growth in brittle materials are analyzed both theoretically and experimentally. We propose a model based on a thermally activated rupture process. Considering a 2D spring network submitted to an external load and to thermal noise, we show that a preexisting crack in the network may slowly grow because of stress fluctuations. An analytical solution is found for the e...
متن کاملMultiscale behavior of crack initiation and growth in piezoelectric ceramics
The multiscale nature of cracking in ferroelectric ceramics is explored in relation to the crack growth enhancement and retardation behavior when the direction of applied electric ®eld is reversed with reference to that of poling. An a priori knowledge of the prevailing fracture behavior is invoked for the energy dissipated in exchange of the macroand micro-crack surface. To avoid the formalism...
متن کاملStatistical Analysis of Slow Crack Growth Experiments
A common approach for the determination of Slow Crack Growth (SCG) parameters are the static and dynamic loading method. Since materials with small Weibull module show a large variability in strength, a correct statistical analysis of the data is indispensable. In this work we propose the use of the Maximum Likelihood method and a Baysian analysis, which, in contrast to the standard procedures,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials
سال: 2011
ISSN: 0109-5641
DOI: 10.1016/j.dental.2010.10.025