Slope Failure of Noncohesive Media Modelled with the Combined Finite–Discrete Element Method

Slope Stability Analysis Under Combined Failure Criteria

Strength reduction finite element method (SRFEM) has been widely used to analyze the slope stability. Strength Reduction Factor (SRF) is yielded as the slope Factor Of Safety (FOS) when a running-though shear failure zone comes into being, in which the Plastic Element EQuivalent strain (PEEQ) is employed as the judgment of shear failure initiation in this paper. Moreover, the filed variable is ...

A Proposed Modeling Method in Finite Element Slope Stability Analysis

Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...

Rock Slope Stability Analysis Using Discrete Element Method

Rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). Since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. Also, Rock slope instability is a major hazard for human activities and o...

Application of the Boundary Element Method to two Dimensional Dynamic Problems of Saturated Porous Media

Application of the Boundary Element Method to two Dimensional Dynamic Problems of Saturated Porous Media