Slip Deformation around Mode I Fatigue Crack Tip during One Loading Cycle
نویسندگان
چکیده
منابع مشابه
Changes in Elastic-strain Profiles around a Crack Tip during Tensile Loading and Unloading Cycles
The changes in elastic lattice-strain profiles and plastic zone around the fatigue crack in a compact-tension specimen were investigated during monotonic tensile loading and unloading cycles using neutron diffraction. Spatially-resolved strain measurements were performed on a 316 LN stainless steel to determine the in-plane (parallel to the loading direction) lattice-strain profiles ahead of th...
متن کاملEffect of T-stress on Edge Dislocation Formation at a Crack Tip under Mode I Loading
We calculate the effect of the nonsingular stress acting parallel to a crack (the “Tstress”) on edge dislocation nucleation at a crack loaded in Mode I. We find that this leads to crack size effect – that is, for small cracks (of order 100 atomic spacings or less), the T stress causes the critical load for dislocation nucleation (expressed in terms of the applied stress intensity factor) to dev...
متن کاملMixed-mode, high-cycle fatigue-crack growth thresholds in Ti±6Al±4V II. Quanti®cation of crack-tip shielding
The role of crack-tip shielding in in ̄uencing mixed-mode (mode I II) fatigue-crack growth thresholds for large, through-thickness cracks in a Ti±6Al±4V turbine blade alloy is examined under high-cycle fatigue loading conditions, i.e., at a loading frequency of 1000 Hz in ambient temperature air for load ratios (Kmin=Kmax) of R 0:1±0.8. Techniques are developed to quantify crack-tip shielding...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملModelling Mode I Crack Initiation in Composites under Fatigue Loading Using Interface Elements
Modelling quasi-static crack growth with interface elements is a widely accepted technique [1-2]. Interface elements are inserted into the finite element mesh along possible crack paths. The interface elements are characterised by a traction-displacement curve. When a specific maximum stress is reached, the interface element undergoes a softening process until the critical fracture energy has b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2004
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.53.633