Slip casting and sintering of high purity alumina.
نویسندگان
چکیده
منابع مشابه
Fabrication of high–strength alumina composite foams through gel–casting process
A water–soluble gelatin combined with polyethylene microspheres were developed to prepare alumina composite foam. Gelatin was used as the gelling agent and polyethylene was used as pore making template. On the other hand, kaolin was used to provide green strength and CuO was applied to decrease the required temperature as a sinter aid. Alumina bodies need elevate temperature for sintering, incr...
متن کاملSintering Behaviour of Waste Olivine and Olivine/Alumina Blends
The sintering behaviour of several green compacts made with olivine or olivine/alumina powder blends has been examined. To this goal, powders were attrition milled, uniaxially pressed into specimens and air sintered at temperatures ranging from 1100 to 1300 °C. The resulting samples were characterized by water absorption, shrinkage, phase composition and density. Compositions containing 5%, 10%...
متن کاملThe effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering
In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...
متن کاملDeformation and Grain Growth of Low-Temperature-Sintered High-Purity Alumina
9 = 0.6 I / s ' 7 = 6.0 0 7 = 2 4 i ti 3 = 6 0 Through close control over green-state powder processing, pure alumina ceramics of 0.5-pm grain size were obtained by sintering at 1250°C. The static grain growth of this material was modest at temperatures below 1300°C. However, dynamic grain growth occurred rapidly during superplastic deformation. Therefore, although the ultrafine-grained alumina...
متن کاملfabrication of high–strength alumina composite foams through gel–casting process
a water–soluble gelatin combined with polyethylene microspheres were developed to prepare alumina composite foam. gelatin was used as the gelling agent and polyethylene was used as pore making template. on the other hand, kaolin was used to provide green strength and cuo was applied to decrease the required temperature as a sinter aid. alumina bodies need elevate temperature for sintering, incr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1988
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.35.619