Sliding wear behaviour of WC-Co reinforced NiCrFeSiB HVOAF thermal spray coatings against WC-Co and Al2O3 counterbodies

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling and control of HVOF thermal spray processing of WC–Co coatings

This work focuses on the modeling and feedback control of the high velocity oxygen fuel (HVOF) thermal spray processing of WC–Co coatings. A first-principles-based process model is proposed to explore the fluid dynamics and particle inflight behavior in the HVOF flow field. Rule-based stochastic simulation, which encapsulates the main features involved in the deposition process, is used to capt...

متن کامل

Residual Stress in Ground WC-Co Coatings

High velocity oxygen fuel (HVOF) spray technique is one of the leading technologies that have been proposed as an alternative to the replacement of electrolytic hard chromium plating in a number of engineering applications. In this study, WC-Co powder was coated on AISI1045 steel using high velocity oxy fuel (HVOF) method. The sinψ method was used to evaluate the through thickness residual stre...

متن کامل

Influence of Microstructure on Residual Thermal Stresses in TiCxN1-x and α-Al2O3 Coatings on WC-Co Tool Inserts

The microstructures of chemical vapor deposited coatings on four tool inserts have been comprehensively characterized using electron backscatter diffraction mapping and these data have been used as input for finite element models used to calculate the residual thermal strains in the coatings. The results indicate that the thermal strains and stored elastic energy in the α-Al2O3 layer are larger...

متن کامل

Reciprocating sliding friction and wear behavior of electrical discharge machined zirconia-based composites against WC–Co cemented carbide

a Department of Mechanical Construction and Production, Ghent University (UGent), IR04, Sint-Pietersnieuwstraat 41, B-9000 Gent, Belgium b Department of Metallurgy and Materials Engineering, Catholic University Leuven (K.U. Leuven), MTM, Kasteelpark Arenberg 44 (bus 2450), B-3001 Leuven, Belgium c Department of Mechanical Engineering, Catholic University Leuven (K.U. Leuven), PMA, Celestijnenla...

متن کامل

Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings

This study investigates the effect of carbide particle size on the microstructure, mechanical properties, and abrasive wear resistance of WC-17%Co HVOF-sprayed coatings. The characteristics of WC-1, WC-2, and WC-3 coatings with carbide sizes of 1 µm, 0.9 µm, and 0.5 µm, respectively, were also investigated. WC-1 coating experienced the maximum carbon loss of 42%, while WC-2 and WC-3 coatings un...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Surface and Coatings Technology

سال: 2020

ISSN: 0257-8972

DOI: 10.1016/j.surfcoat.2020.125468