Sliding friction and wear performance of the nano-bioceramic α-Al2O3 prepared by high energy milling
نویسندگان
چکیده
منابع مشابه
Synthesis of Wurtzite Nano-crystalline ZnO-CoO Pigment by High Energy Milling
Zn0.9Co0.1O ceramic pigments were synthesized using simple high energy milling method. Zinc and cobalt oxides were used as starting materials. Products were investigated using simultaneous thermal analysis and fourier transformation infrared. Pigments were characterized using X-ray diffraction, diffuse reflectance and Scanning Electron Microscopy. The results showed the effect of calcination te...
متن کاملFabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite
Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملIon Transport Properties of the Inverse Perovskite BaLiF3 Prepared by High-Energy Ball Milling
For many applications such as advanced energy storage systems, chemical sensors or electrochromic devices fast ionic conduction plays an important role. In many cases, see e.g., Refs. [1-3], nanocrystal-line ceramics with crystallite diameters smaller than 50 nm show an enhanced ion conductivity compared to their coarse-grained counterparts, i.e., single crystals or materials with µm-sized part...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology International
سال: 2015
ISSN: 0301-679X
DOI: 10.1016/j.triboint.2015.07.006