Size optimization of single edge folds for cold-formed structural members
نویسندگان
چکیده
منابع مشابه
Local and Distortional Buckling of Cold-Formed Steel Members
Laminar structures have a high post-buckling strength reserve. Cold-formed steel profiles can be taken as a set of thin plate elements. Therefore it is necessary to design this type of profiles taking into account that reserve of strength in post-local buckling modes of failure. The method normally used to design this type of structures is based on the Effective Width concept. The Effective Wid...
متن کاملYield - line analysis of cold - formed steel members
The objective of this paper is to provide a state of the art review of the application of yield-line analysis to cold-formed steel members, and present a newly developed solution to the stresses that develop in an inclined yield-line. Yield-line analysis in cold-formed steel members is shown to be distinct from traditional yield-line applications. Challenges in the application of yield-line ana...
متن کاملFuzzy Approach for Optimization of Cold-Formed Cross Sections
This paper presents a fuzzy procedure for obtaining optimal design of channel section shapes under bending moment. The proposed approach refers to an ideal, equivalent single objective representation for the bicriteria objectives, where the cross-sectional area of thin-walled beam is the first objective, while the deflection of the beam is the second one. The design variables were selected as t...
متن کاملPredictive models for strength enhancements in cold-formed structural sections
Cold-formed structural sections are manufactured at ambient temperature and hence undergo plastic deformations which result in an increase in the yield stress and ultimate stress, but reduced ductility. This paper begins with a comparative study of existing predictive models to harness this strength increase. Modifications to the existing models are then made and an improved model is presented....
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strength of Materials and Theory of Structures
سال: 2020
ISSN: 2410-2547
DOI: 10.32347/2410-2547.2020.105.73-86